Installation drawing
Insert the mounting bolts through the holes and the mounting plate from the bottom up.
Note:
Use only the mounting bolts (M8 ×30MM) and washers supplied by the manufacturer.
Be sure the bolts are properly tightened, otherwise the base can be damaged.
Clutch
Turn the clutch 90° to the Free spool position. Let the wire from the drum. Connect the clevis hook
on the wire.
Turn the clutch 90° back to the Engaged position.
Note:
Make sure that the drum is engaged by pulling the wire.
Fix the fairlead on the mounting plate.
Note:
If the rope is synthetic, you can fix the aluminium fairlead on the mounting plate and then
reel the rope.
ISM
Choose a suitable and safe mounting location for the ISM. The thickness of the location must be 1-
3mm. Drill two 6 mm holes with the distance 67 mm. Fix then the ISM with the bolts (M5X12)
properly.
17
