9
STEP 3 - Opening the Housing
Lid Snaps have a
Lock
.
1. Push Lid Snap Locks forward and lift as shown.
Open opposing Lid Snaps simultaneously. Keep
pressure on the Lid Snaps so they do not fly
open quickly.
Some Lid Snaps have a lot of
spring tension once they go over center, so keep
a firm grip on each Lid Snap. Lid Snaps may also
be opened one at a time.
2.
Remove the Housing Back.
Push Forward
Lid
Snap
Lock
Lift
STEP 4 - Attach Hotshoe to Camera
ON
Fro
nt
Ikelit
e
Panasonic
DMC-LX100
OFF
Diagram A
Hotshoe
Connector
Mounting Tray
Housing Back
O-ring
External Strobe Connector
& Waterproof Cap
(Do not remove underwater)
1. The Mounting Tray for the camera is secured to the housing back.
Position the camera above the Mounting Tray.
2. Slide and push the housing Hotshoe Connector forward into the Camera
Hotshoe Mount until it stops,
Diagram A
. Make sure the Hotshoe is all
the way forward in the Mount. This should be done
before
the camera is
secured with the mounting bolt.