8
5
6
7
CCAAU
UTTIIO
ON
N::
Some camera tripod socket threads are plastic. The mounting
tray bolt is metal. Do not cross thread or over tighten as you
may damage the camera tripod socket threads.
CAMERA / MOUNT - (SX10IS Shown)
O' Ring
Lid
Hook
Mounting Bolt
Mounting
Tray
10.0
MEGA
PIXELS
PowerShot
SX10IS
Canon
IInnssttaalllliinngg tthhee CCaam
meerraa ((ccoonntt..))
5. Using a coin or screwdriver (preferred), secure the camera with
the mounting bolt which threads into the camera’s tripod
socket ((D
Diiaaggrraam
m BB)).
Diagram B
IInnssttaalllliinngg tthhee CCaam
meerraa
1. Pull out on each housing control until it stops. This will get the
controls out of the way for installation of the camera.
2. Remove the back from the housing.
3. The mounting tray for the camera is secured to the housing
back. Position the camera on the tray.
4 Slide the housing Hotshoe Connector into the Camera Hothoe
Mount ((PPAAGGEE #
#77 -- D
Diiaaggrraam
m AA)). Slide the connector forward
until it stops. This must be done before the camera is secured
with the mounting bolt ((PPaaggee #
#88 -- DDiiaaggrraam
m BB)).
N
NO
OTTEE:: If your are using an EV Controller and NOT hard-wiring your
strobes directly to the housing, leave the housing hotshoe
disconnected from the camera and raise the camera flash. You
will also need to install the Flash Deflector ((PPaaggee #
#1111)).
External Strobe Connector
Waterproof Cap
(Do not remove underwater)
O-ring
Housing Back
Hot Shoe Connector
Mounting
Tray
Hotshoe Connector - (SX10IS Shown)
CCAAU
UTTIIO
ON
N::
Do not remove the External Strobe Connector Waterproof Cap
unless an external sync cord is going to be plugged in. Do not
remove the Waterproof C ap or Sync Cord underwater.
Diagram A
O
Oppeenniinngg tthhee H
Hoouussiinngg
1. Lid Snaps have a LLoocckk.
To open, push Lid Snap Lock forward and lift as shown. Keep
pressure on the Lid Snap so it does not fly open quickly.
Some lid snaps have a lot of spring tension once they go over
center, so keep a firm grip on the lid snap. Lid Snaps may be
opened one at a time.
Lift
Push Forward
Lid Snap Lock
SX10, SX20 - Back View
[E] Frame Selector/Erase
[F] Manual Focus
[G] Macro
[H] FUNC./SET
[I] ISO
[J] Control Dial
[K] Self-Timer
[L] Display
[A] Shortcut
[B] Movie
[C] Playback
[D] +/- Exposure
B
C
D
E
F
G
H
I
K
L
H
A
TTL Connector
M
J
[M] Menu
Flash
Button
