33
Flex Arm
Pro-V8
LED
Lite Head
Arm Lite
Mount
Flex Arm
Base
Handle
PPRRO
O--VV88 LLEED
D VVIID
DEEO
O LLIITTEE &
& FFLLEEXX AARRM
M ________________________________________
The Pro-V8 video light comes with the Flex Arm Lite Mount
already in place. The Flex Arm Lite Mount is secured to the Lite
Head by a mounting bolt that can be accessed through the center
opening of the Flex Arm. The Flex Arm Lite Mount can be
removed for cleaning or packing.
AATTTTAACCH
H TTH
HEE FFLLEEXX AARRM
M TTO
O TTH
HEE PPRRO
O--VV88 LLIITTEE ________________________
To secure the Flex Arm to the Pro-V8 Lite align the bottom of the
Flex Arm Lite Mount with the Flex Arm and push the two
components together until they snap into place.
AATTTTAACCH
H FFLLEEXX AARRM
M TTO
O H
HAAN
ND
DLLEE ________________________________________________
To secure the Flex Arm to the handle, align the bottom of the Flex
Arm over the Flex Arm Base and push the two components together
until they snap into place. The Lite Head can now be adjusted to
multipule positions for optimal lighting.
RREEM
MO
OVVIIN
NGG FFLLEEXX AARRM
M FFRRO
OM
M H
HAAN
ND
DLLEE ____________________________________
To remove the Flex Arm and Lite Head from the housing handle,
grasp the Flex Arm just above the Flex Arm Base on the top of the
handle and bend the Flex Arm until it pops off the Base.
M
MO
OU
UN
NTTIIN
NGG TTH
HEE FFLLEEXX AARRM
M BBAASSEE TTO
O H
HO
OU
USSIIN
NGG H
HAAN
ND
DLLEE__
The Flex Arm can be mounted to the top of the handles on Ikelite
Video housings. Remove the wingnut and washer from the top of
either handle. Place the Flex Arm Base over the bolt protruding from
the top of the handle. The bottom of the Flex Arm Base is slotted to fit
over the handle to eliminate rotation. With the handle bolt protruding
through the Flex Arm Base, secure the Flex Arm Base to the top of the
handle by screwing the black knurled Base Retainer onto the handle
bolt.
Bolt
Flex Arm Base
Base Retainer
Handle
M
MAAIIN
NTTEEN
NAAN
NCCEE__________________________________________________________________________________________________________________________
1. We suggest storage of your lite with the locking lever OPEN to allow any potential hydrogen/air
mixture to escape.
2. The front edge of the lite body and the inner recess in the front assembly are the sealing
surfaces. DO NOT allow these surfaces to become damaged.
3. Keep the o-ring and sealing surfaces clean. DO NOT stretch the o-ring when cleaning. It is not
necessary to lubricate the o-ring. Never use spray lubricant because it will cause cracking of the
plastics.
4. Occasionally clean the metal contacts for a better connection.
5. The front head assembly has been factory sealed; DO NOT disassemble.
CCAAU
UTTIIO
ON
N____________________________________________________________________________________________________________________________________
DO NOT use batteries that have been wet; batteries from a flooded lite should be discarded.
Water could create an internal short circuit at some later date causing a potential explosion. The
normal evolution of all batteries is emitting hydrogen gas. This gas must be absorbed or allowed to
escape to prevent ignition of the entrapped hydrogen/air mixture. We suggest storage of your lite
open to allow any hydrogen/air mixture to escape.
RREEPPLLAACCEEM
MEEN
NTT PPAARRTTSS______________________________________________________________________________________________________________
0124
Main seal o-ring
0522
Rubber shroud
LLIIM
MIITTEED
D W
WAARRRRAAN
NTTYY________________________________________________________________________________________________________________
All Ikelite products are warranted against any manufacturing defects for a period of one year
from the original date of purchase. Defective products should be returned prepaid to Ikelite.
Ikelite will, at its discretion, repair or replace such products, and will return to customer prepaid.
All other claims, of any nature, including but not limited to bulb failure are not covered. Except
as mentioned above, no other warranty expressed or implied, applies to this Ikelite product.
IIKKEELLIITTEE U
UN
ND
DEERRW
WAATTEERR SSYYSSTTEEM
MSS
50 West 33rd Street
PO Box 88100
Indianapolis, IN 46208 USA
317-923-4523
w
ww
ww
w..iikkeelliittee..ccoom
m
Email [email protected]
Pro-V8_LED_2-1209
