INTRODUCTION
Thank you for purchasing an Ikelite Strobe. Ikelite brings over 50 years of underwater
photographic and lighting experience to the strobe market. Ikelite Strobes are designed
and built in the USA by Ikelite to suit both the professional and the amateur photographer.
The purpose of a strobe is to illuminate the subject and assist the camera in taking vivid
pictures. The Ikelite DS160 Strobe is equally suited for general and wide-angle
photography, covering up to a full 100° angle with a diffuser.
The contents of this instruction manual are subject to change at any time without prior
notice.
STARTING OUT
Before using the Ikelite DS160 Strobe, please read this owner’s manual thoroughly and
retain it for future reference. Fully charge your strobe’s battery pack prior to your first use.
Ikelite recommends becoming familiar with the features and functions of the Ikelite DS160
Strobe above water before trying the camera and strobe in the water. And, if you have not
yet done so, it is suggested that you read your camera owner’s manual as well.
STROBE COMPATIBILITY
The DS160 Strobe is compatible with all Ikelite TTL systems and current digital cameras,
as well as all older TTL film cameras including the Nikonos system. A variety of sync
cords, sensors, and TTL adapters are available to connect to almost any camera system
currently on the market.
STROBE POWER
The DS160 recycles in a quick 1.4 sec from full discharge. When fired at a fractional
power — whether in TTL or manual mode — the strobe recycles virtually instantaneously.
Number of flashes per full charge will increase dramatically in most cases when using in
TTL mode with a compatible camera system. The powerful DS160 is adjustable in 10
half-stop increments for precise control over your exposure when used in manual mode.
IKELITE DS160 STROBE
(continued)
4