9
2.
Visually confirm that there are no signs of water intrusion. One sign
of water intrusion is a steady stream of bubbles coming from one of
the housing’s seals.
Maintenance
Post-Dive
1.
Rinse the housing with dome port installed in fresh water.
2.
NEVER leave your housing in the fresh water rinse tank. Collisions
with other peoples’ gear can cause scratches or damage to your
equipment.
3.
Dry the dome with a clean micro fiber lens cleaning cloth.
4.
Attach the protective neoprene cover.
5.
Stow the housing in a shaded place where it is protected from
impact or overheating. If no shade is available, we recommend
covering the housing with a towel or cloth.
Travel and Storage
1.
Clean and dry the exterior of the dome port. DO NOT use any type
of glass or surface cleaner on the dome port.
2.
Attach the protective front neoprene cover.
3.
Store in a cool, dry place.
Scratches
Often scratches will fill in with water and become invisible in the
resulting image. Scratches are most likely to show up in your image
when shooting towards the sun or a light source.
Light scratches may be buffed out using NOVUS plastic polish,
available through Ikelite in single-use packets or bottles.
