3
Important Notices
»
This housing requires a compatible Lens Port for waterproof
operation. The housing is not waterproof without a Lens Port
attached.
»
To prevent salt build-up and sticking controls, submerge the
empty housing in clean, freshwater. Operate the controls
several times each while underwater to flush out any residue.
»
Never leave a housing in a rinse tank, even if it is the only
system in the tank. Most catastrophic floods happen when the
user walks away from a housing while it is in the rinse tank.
»
Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.
