Ikelite 6891.1, Manual, Page: 4 / 9

6 7
Removing the standard Ikelite viewfinder
Press the thin edge of the Attachment Tool into the two slots of the
Standard Viewfinder.
Carefully twist the Attachment Tool counter-clockwise to loosen and
remove the viewfinder. If additional leverage is required, insert the
end of a screwdriver into the lower center hole of the Attachment Tool.
It is best to apply torque slowly, while applying downward pressure
on the tool to reduce the risk of slipping and damaging the housing’s
back.
Once the Standard Viewfinder has been completely unscrewed and
removed from the housing’s back place the viewfinder in a sealable
plastic bag and store in a safe location.
Viewfinder Slots
Attachment Tool
Attachment Tool
Thin Edge