3
Initial Camera Settings
-
Insert fully charged battery and formatted SD card.
-
Set Date and Time.
-
Set Shooting Mode to “P” Program.
-
Set ISO to 100 and White Balance to auto “AWB.”
-
Set the Square to “Single Shot.”
-
Set Resolution to “L” and “1280.”
-
Set AF Frame to “Center” and Digital Zoom to “Off.”
-
Set AF Point Zoom to “Off” and Servo AF to “Off.”
A strobe focusing light is recommended to assist AF underwater.
-
Set Lamp Setting to “Off” and Red-Eye Correction to “Off.”
-
Set Light Metering to “Center Weighted.”
-
Set Review to “5 Seconds” and Review Info to “Off.”
-
Set Blink Detection and Grid Lines to “Off.”
-
Set Flash to “On flash always fires.”
-
In Power Saving, set Auto Power Down to “Off.”
-
In Power Saving, set Display Off to “3 min.”
Note:
Enable Macro mode when shooting close-up subjects. If
overexposure occurs, back away from the subject and zoom in and/or
use “-” Exposure Compensation.
External Accessory Lenses
Attach 46mm threaded #6420.46 Ikelite W-20 Wide-Angle Lens or other
compatible lenses directly to the front of the port.
Attach 67mm threaded #6420 Ikelite W-20, Inon Type II and Epoque
wide-angle lenses using the #9306.81 port adapter. This adapter may
also be used to attach other compatible 67mm threaded macro lenses.
Attach bayonet style Inon macro or UWL-100 28AD, UWL-105AD and
UFL-165AD wide angle or macro lenses using the #9306.79 port adapter.
Slight vignetting (shading in the corners) may be present in the widest
setting when using an external accessory lens. This effect can be
eliminated by zooming in slightly.
