Initial Camera Setup
- before placing camera in housing
- Insert a fully charged battery. Due to the power required to operate the
camera and LCD screen, start each dive with a fully charged camera
battery.
- In FUNC./SET:
Set Mode Dial to “Av” Aperture Priority.
Set Metering to “Center Weighted Avg.”
Set AWB White Balance to “Auto.”
Set ISO to “200.”
Set Drive Mode to “Single Shot” and Still Image Aspect Ratio to 4:3.
Set Recording Pixels to “
L
” 12M and Compression to “
S
” Superfine.
Set Movie Quality to “
1920/30
.”
- In MENU Shooting Settings:
Set AF Frame to “Center” and AF Frame Size to “Normal.”
Set Digital Zoom to “Off” and AF-Point Zoom to “Off.”
Set Servo AF to “Off” and Continuous AF to “On.”
Set AF-assist Beam to “Off.”
In the Flash Settings Menu set Flash Mode to “Auto.”
Set Red-Eye Corr. and Red-Eye Lamp to “Off.”
Set i-Contrast to “Auto” and Safety Shift to “Off.”
Set Review to “4 seconds.”
- In MENU Camera Settings:
Set Date, Time and Time Zone.
Set Lens Retract to “1 min.”
Set Eco Mode to “Off.”
In Power Saving: set Auto Power Down to “Off” & Display Off to “3 min.”
Insert and format an SDHC memory card.
4
