17
5.
Attach one end of the fiber optic cord into one of the fiber optic
ports on the front of the housing. The connector is a press-fit into
the fiber optic port.
MENU
DISP
MF
PowerShot G1 X
Mark II
S
S
Fiber Optic Connector
O-ring
6.
Attach the other end of the fiber optic cord to a compatible strobe.
7.
Set the strobe to the appropriate setting based on manufacturer
recommendations.
8.
Turn the strobe on.
9.
Take a test photo to ensure that your strobe is functioning properly.
10.
Repeat steps 3-9 when connecting a second strobe.
Installing an Accessory via the Accessory Port
1.
Remove the Hole Plug using an 11/16” open end wrench.
2.
Check the accessory fitting o-ring sealing area. Check o-ring and
housing o-ring sealing area. All should be clean and free of hair,
sand, or other debris.
3.
Lightly lubricate o-ring with Ikelite lubricant. Use ONLY Ikelite
lubricant. Other manufacturer lubricants can cause the o-ring to
swell.
