background image

9

D

Diiffffuusseerr aanndd D

Deefflleeccttoorr ccoonntt..

A diffuser and deflector are

included with the housing. The

diffuser is white transparent

plastic. The deflector is also

white but is not transparent

and has a decal on the front.

To install the diffuser or

deflector spread the port

clamp at the spring end

and slide over the lens port.

The white plastic should be

placed in front of the camera

flash. The port clamp should be

pushed back against the front

of the housing.

D

Diiffffuusseerr

The diffuser should be installed when using the camera's built in

flash. When shooting with the camera's built-in flash at

approximately 2 feet (0.6 m) or less, the lens port on the

housing may block a portion of the light from the camera's

built-in flash, creating a shadow in the lower left of the photo.

If this occurs, zoom the lens slightly to eliminate the shadow.

(You can test this above water)

D

Deefflleeccttoorr

The deflector should be installed when using an external strobe

such as the DS51 or DS125 Substrobe and EV Controller. The

deflector will redirect the camera's flash to the EV Controller

which controls the external strobes output.

Diffuser/
Deflector 
material

Port Clamp

Spring

Spread to Install

This edge 
against 
housing

10

11

O

Oppttiioonnaall AAcccceessssoorriieess
BBaacckk O

O''rriinngg 

##00110099

O'rings last for several years if properly maintained. (See

maintenance) Always carry a spare.

U

URR//PPrroo FFiilltteerr 

##66444411..3322

The UR/Pro underwater color correcting filter is designed to

restore some of the warm colors filtered out by the water. For

available light use only, not recommended for use with flash.

UUssee tthhee EEVV CCoonnttrroolllleerr w

wiitthh aa DDSS SSuubbssttrroobbee

The EV Controller provides 10 manual power settings in 1/2 stop

increments for the DS51 or DS125 Substrobes. The EV Controller has a

built-in slave which can be triggered by the camera's built-in flash.

SSuubbssttrroobbee PPaacckkaaggeess aavvaaiillaabbllee

Ikelite Ball Arm Systems are provided with these packages

#3944.54 SubStrobe DS51 with EV Controller

#3944.77 SubStrobe DS125 with EV Controller

Substrobe 
DS125

SSuubbssttrroobbee D

DSS112255 

The Substrobe DS125 covers

the equivalent of a 18mm

lens, 100 degrees. It is the

ideal choice when using

accessory wide angle lenses

greater than 28mm. 

Substrobe 
DS51

EV Controller

EV Controller

SA-100Q
Arm

SA-100Q
Arm

SSuubbssttrroobbee D

DSS5511

The Substrobe DS51 covers the

equivalent of a 28mm lens. It is

the ideal choice when using

only the camera lens or the

camera lens with a macro

accessory lens.

O

Oppttiioonnaall AAcccceessssoorriieess CCoonnttiinnuueedd

8

D

Diiffffuusseerr &

& D

Deefflleeccttoorr IInnssttaallllaattiioonn

Housing shown with

Diffuser installed.

Diffuser

Reviews: