12
Attaching a Fiber Optic Cord
1.
Check the end of the fiber optic cord to ensure that it is clean and
smooth.
2.
Ensure that the fiber optic cord o-ring is in place. This o-ring does
not provide waterproofing, however it does keep the fiber optic cord
in place.
3.
Attach one end of the fiber optic cord into one of the fiber optic
ports on the front of the housing. The connector is a press-fit into
the fiber optic port.
O-ring
Fiber Optic
Cord
4.
Attach the other end of the fiber optic cord to a compatible strobe.
5.
Set the strobe to the appropriate setting based on manufacturer
recommendations.
6.
Turn the camera on and then the strobe(s).
7.
Take a test photo to ensure proper functioning properly.
Spare Parts
•
Rear o-ring # 0109
•
Push button o-ring kit # 6201.03
•
Vinyl port cover # 0200.08
