11
Troubleshooting
Water enters the
housing
- Remove, clean and properly lubricate the main
o-ring.
- Look for hairs, dirt, or foreign debris crossing the
o-ring seal.
- Reassemble the housing without a camera
installed and pressure test or take diving.
- Return housing to Ikelite for routine maintenance.
Problem
Solution
Pictures are too blue
or too green
- Add an optional color correcting filter.
- Add external lighting
- Move in closer to your subject when taking a
picture.
- Lightly lubricate main housing o-ring, see page 8.
- Make sure that the camera is installed correctly.
Housing is hard to
close
Push buttons or
controls are sticky
and hard to operate
- Remove the camera and rinse the closed housing
in freshwater. Vigorously press each push button
in and out several times to release any trapped
saltwater or debris.
- If a control is sticky, grab the control knob, pull it
out, and then push back in.
- Return housing to Ikelite for routine maintenance.
