RReettuurrnniinngg PPrroodduuccttss ffoorr SSeerrvviiccee
Ikelite is most interested in preforming any service to assure that
all products perform as intended. For repair or service, return the
product to the address below with your name, address, phone
number and a brief description of the problem. Evidence of
purchase date must be provided to obtain warranty service.
Normal service turnaround time is approximately 2-3 weeks.
IIkkeelliittee U
Unnddeerrw
waatteerr SSyysstteem
mss
5500 W
W 3333rrdd SSttrreeeett
IInnddiiaannaappoolliiss,, IIN
N 4466220088 U
USSAA
W
Whheenn rreettuurrnniinngg pprroodduuccttss,, sseenndd ““aattttnn.. RReeppaaiirr D
Deepptt..””
331177--992233--44552233
““ggeenneerraall qquueessttiioonnss”” ee--m
maaiill:: iikkeelliittee@
@iikkeelliittee..ccoom
m
w
ww
ww
w..iikkeelliittee..ccoom
m
10
IInnssttaalllliinngg tthhee M
Moodduullaarr FFllaatt PPoorrtt
There are four port locks on the front of the housing. Each Port
Lock has a Release Button. Lift the release button and slide each
Port Lock away from the
port opening before
installing the port. In the
unlocked position, the
Release Button will remain
in the up or open position
as shown.
The housing port seal is
a piston seal and requires
that the housing/port
o-ring be lightly lubricated
for easy installation. Put a
small amount of lubricant
on your fingers and gently
pull the o-ring through your fingers to lightly lubricate it. Do not
stretch the o-ring. Check that the lip of the Port Body where the
o-ring fits and the sealing surface on the housing are clean. Place
the o-ring back onto the Port Body. Place the port and o-ring into
the housing’s port opening. Press down on the port firmly and
evenly until you feel the port slide into place. Continue to push
down on the port. Using your other hand, push each port lock
forward. The Release Button on the port lock will drop down and
click into the locked position.
VViissuuaallllyy cchheecckk tthhee ppoorrtt lloocckkss before each dive to make sure they
are in the down and locked position. Do not rely solely on the
audible click when pushing each port lock in.
CChheecckk aarroouunndd tthhee ppeerriim
meetteerr ooff tthhee ppoorrtt sseeaall to see that the o-ring
is properly sealed and not extruded.
Slide
To O
pen
Lift To Unlock
Open Position
Port Lock Release Button
in Locked Position
Port Lock Release Button
in Unlocked Position
Push forward
to Lock —Release Button
will drop down and click into
locked position
➜
➜
9
M
Maaiinntteennaannccee
After each dive, the exterior of the housing and Port should be
rinsed thoroughly in fresh water and dried with a soft cloth.
Remove any water spots from the port assembly faceplate as they
can cause blurry spots in the photographs.
After prolonged saltwater use, the exterior of the Port and
housing should be soaked in a mild non-abrasive liquid soap and
water solution. Rinse thoroughly and dry with a soft cloth.
M
Moodduullaarr FFllaatt PPoorrtt--0022--00221100
IIkkeelliittee LLiim
miitteedd W
Waarrrraannttyy
All Ikelite products are warranted against any manufacturing
defects for a period of one year from the original date of purchase.
Defective products should be returned prepaid to Ikelite. Ikelite
will, at its discretion, repair or replace such products, and will
return to customer prepaid. All other claims of any nature are not
covered. Housing is pressure tested and warranted to 200’ (60m)
maximum underwater depth. Except as mentioned above, no other
warranty expressed or implied, applies to this Ikelite product.
