Ikegami RM-71F, Operation Manual

Page: 27 / 38

16
3. After the menu indication, setting items can be selected by turning the rotary
switch.
4. Press the rotary switch and the setting of the selected item starts blinking.
5.
Next the setting can be changed by turning the rotary switch.
6.
When the desired setting is displayed, push the rotary switch.
7.
Exit the Panel Configuration menu by selecting Exit and pressing the rotary
switch. Or press the Knob Free switch and rotary switch simultaneously.
6.2 List of Panel Configuration Settings
Item Function Mode
IRIS MODE Select ABS
(Absolute value control)
MPED RANGE Select STD
ࠊ
1/2
ࠊ
1/4
ࠊ
OFF
VR DISP
VR value display *
ON
ࠊ
OFF
BUZZER Select STD
ࠊ
ATT
ࠊ
OFF
AVC SELECT Select 1-2
ࠊ
1-4
ADJUST MODE
IRIS operation position
adjustment function
USER MODE Select COMP
ࠊ
BASIC
RAM CLR Select MENU
ࠊ
ALL
EXIT
Menu mode Exit
* VR value display ON / OFF is, DNR · DEHAZE function only.
(M.PED · IRIS is no display)
ڧ
Standard Setting
6.3 IRIS Position Adjustment Function
It is possible that the lens iris is not at the OPEN/CLOSE end when the RM iris is at the
OPEN/CLOSE end, even under full range operation. The RM-71F has a function to recognize
the OPEN/CLOSE end positions of the iris in the panel configuration menu, and correct the
difference with the camera head lens iris value.
Caution
With the camera LENS ADJUST function, check that the iris F stop
control is correct at the camera head. Please note, the open/close end
positions are already adjusted for the RM-71F at the factory prior to
shipment.
Reference
: For the LENS ADJUST function, refer to the operation manual of the connected
camera. Some cameras do not have the LENS ADJUST function.