Ikegami RM-70F, Operation Manual

Page: 26 / 40

13
5.3 SCENE FILE Setting Method
With the rotary switch scene files 1 to 8 can be selected. Pressing the SCENE
switch enables saving and loading of the scene file which has been selected.
[SCENE FILE saving method]
1. Turn the rotary switch to select "SCENE" at the upper section of the
indicator.
2. Press the rotary switch and select the FILE number to be set, shown at the
lower section of the indicator.
3. Hold down the SCENE switch for about 2 seconds.
4. The scene file selected in Step 2 is saved.
[SCENE FILE loading method]
1. Turn the rotary switch to select "SCENE" at the upper section of the
indicator.
2. Press the rotary switch and select the FILE number to be read, shown at the
lower section of the indicator.
3. The FILE number selected in Step 2 is now allocated to the SCENE file
switch and ON/OFF operation becomes available.
Note
: When the FILE number is switched while a SCENE file is already ON,
the switched scene file is loaded the next time the Scene switch is
pressed.