manualshive.com logo in svg

Ikegami MLW-2420C, Instruction Manual

Share
Download
Ikegami MLW-2420C Instruction Manual Download Page 8

2

2. General Description

This MLW-2420C is a 24” Wide Screen, Multi-format LCD monitor for specialist ap-

plications where high quality picture reproduction and true colour rendition is re-

quired.

It employs a very fine LCD panel of 1920(H)x1200(V) WUXGA with full colour  repro-

duction of 16.7 million colour graduation ( 8 bit x 3 colours ) with high brightness

performance of 400 cd/sq meter. A smart jaggy-free or non-serrated smooth natural

picture can be displayed, due to Ikegami’s latest unique over-drive circuit.

For the convenience of users, various options are available, especially RGB or SDI

input types to meet varying customer input specification requirements.

2-1. Features

•

Strong, Rugged construction, but Light in weight

The MLW-2420C LCD monitors are designed to withstand harsh applications and

environments for a long service period. Built with a strong Aluminum Alloy frame

body for easy handling in setup, because of clever body design for lighter total weight,

and also for a good anti-radiation performance.

•

High Resolution, Faithful Colour Reproduction

All Ikegami medical LCD monitors employ a high quality LCD panel of high reso-

lution with very natural colour reproduction capability, enhanced video quality is

achieved by a newly employed powerful signal process engine, which draw out full

performance of a 1900x1200 WUXGA panel capability for the MLW-2420C.

•

High Performance from New Digital Process Engine

Easy viewing is assured with a smart digital process, compensating for, digital

Jaggy-free lines in an interlace-progressive conversion, irritating glare from  dif-

ferences in each pixel and general noise generation especially in dark areas.

•

Very Wide Viewing Area with high contrast

Both 178 degrees, Vertical and Horizontal viewing angles are achieved ensuring

much easier viewing of the panel from different positions with a high screen con-

trast ratio. The IK-LCD75-100-B VESA type Wall Mount Adaptor is available as an

useful option for 15”, 19” and 24” Ikegami LCD monitors.

•

Various Gamma Characteristics

5 different Gamma characters can be set, including the Standard CRT Gamma of

2.2, the DICOM Gamma and so on.

Summary of Contents for MLW-2420C

































Reviews:

No comments

Brands by name

Popular brands

Load more brands