(2)EXPOSURE
E-8
It seleccts Lens Mode, Brightness, Shutter speed, Sens-up and AGC Gain.
(3)BACKLIGHT
Setting the backlight compensation and light source correction function
are available.
WDR - Used to improve contrast in bright/dark areas
( NOTE : WDR function is only inactive on CVBS output.)
BLC - Adjust the area to be enhanced and sets the level
HLC - It is the ability to reverse bright points to black or gray,
(areas such as headlights, any high luminance areas) this function will
improve this function will improve the overall picture.
LENS - DC or Manual selection
BRIGHTNESS - Sets the level of the overall
SHUTTER - Auto, Manual, FLK selection, 1/30~1/30K.
Set this on to reduce the exposure time of each image.
This can be used to reduce blur in images with fastchanging content.
FLK mode Use this when flicker is observed in the image
underfluorescent lighting
SENS UP - Slows frame rate and increases low light sensitivity
AGC- Level Control -Used to adjust overall gain
①
②
③
④
⑤
①
②
③
DC
10
AUTO
X4
10
BRIGHTNESS
SHUTTER
LENS
SENS-UP
AGC
EXPOSURE
RETURN
