Ikegami HTM-1517R, Service Manual

Page: 5 / 108

PRECAUTIONS FOR OPERATIONS
1) Never let this unit fall or subject it to strong
shock.
2) Do not remove the cabinet unless necessary.
High-voltage parts are contained in the
cabinet and they are very dangerous if you
touch then. Only qualified service engineers
are allowed to adjust the internal parts of the
cabinet.
3) This color monitor has been adjusted to
signals conforming to each broadcasting
standard.
It cannot be used for signals of different
broadcasting standards.
Be sure to operate the color monitor within
the voltage range marked on its back.
4) If cabinet or screen is dirty, wipe with soft
cloth. At this time, avoid using benzine or
thinner.
Otherwise, the paint may peel away.
5) Note that, if video signals with high
luminance are monitored on the CRT over a
long period of time, the CRT may burn in the
image.
6) Avoid using or storing this unit in the
following places:
• Hot (+40ºC or more) or cold (0ºC or less)
places.
Especially where this unit may be exposed
to the direct rays of the sun; the cabinet
may deform and the fluorescent screen of
the CRT may deteriorate.
• Humid and dusty places.
• Places where there is considerable
vibration.
• Places exposed to rain or water.
• When storing or transporting this unit, pack it
in the supplied carton or equivalent.
7) If no image can be monitored even after
performing user adjustment or the unit
appears faulty, do not dismantle this unit by
yourself. In such cases, contact the Ikegami
service desk.
8) Should this unit fail within one year after
delivery, it will be repaired free of charge
unless the malfunction was caused by
mishandling or misuse of the user.
However, the fuses are not covered
by the warranty.
9) The specifications and appearance of this unit
may be subject to change for further
improvement without prior notice.