ȿ
1
- Turn the main
jog
to make your selection, and click the jog to select
2
- Press the main jog on the front of the monitor for 2 seconds to enter or exit the menu
- Turn the jog to move around the menu
- Click the jog to make your selection
3
Factory default setting for programmable keys on the front of the monitor
F1
UMD Type
F2
Function key
HLE-1853G
First Steps
Selecting Input
Menu Control
When the monitor is powered on and connected to your source,
- To select your source, please press
SOURCE
button
-
Factory default is SDI
. Please skip this step if you are connected to SDI source
- Main jog allows users to move one step at a time. If you wish to move back to previous step in the menu, press
the jog for two seconds. If you want to exit the menu and restart, press exit button depending on where you are in
menu tree
Marker
F3
Waveform
F5
Blue/Mono
- Users can program 8 function buttons on the front by
MENU
Function Key
Function Key #
H/V Delay
Vectorscope
F7
F8
SDI Output
- All features in the monitor can be programmed in one of these keys
F6
F4
HDMI Output
Initial Setup
