Ikegami HLM-2450WB, Operation Manual

Page: 14 / 68

- 4 -
⑩
F1
switch
・
Press this switch to select an item preset on the
menu.
・
For presettable items, refer to "4-4. Description on
MENU 2 Functions"
⑪
F2
switch
・
Press this switch to select an item preset on the
menu.
・
For presettable items, refer to "4-4. Description on
MENU 2 Functions".
⑫
MONO
switch
・
Press this switch to display color signals in black
and white.
※
This function is disabled in the component RGB
input or PC input mode.
⑬
ASPECT
switch
・
Use this switch to change image aspect ratios
(4:3/16:9/ZOOM).
・
Choose between memorizing the settings for each
channel and making the settings for all channels
on MENU2.
※
“ZOOM” magnifies the image area in the 4:3
letterbox.
<
ZOOM
>
※
SDTV format signals (480i/575i) only are
effective.
※
In the PC input mode, this function is disabled.
⑭
SCAN
switch
・
Press this switch to change image display sizes
(normal-scan/under-scan).
※
In the PC input mode, this function is disabled.
<16:9 Nomal-scan> <16:9 Under-scan>
1920 x 1080 pixel display 95% pixel in Normal-scan
<4:3 Nomal-scan> <4:3 Under-scan>
1440 x 1080 pixel display 95% pixel in Normal-scan
⑮
APT
switch
・
Press this switch to select the aperture.
・
Set a correction amount on PRESET MENU.
※
In the PC input mode, this function is disabled.
⑯
SCREEN
switch
・
Press this switch to display images in R, G or B
individually.
・
The switching between colors takes place as
follows each time this switch is pressed.
“R only”
→
“G only”
→
“B only”
→
“Normal
Screen”
※
In the PC input mode, this function is disabled.
⑰
MARK
switch
・
Press this switch to turn on/off markers.
・
To change icons, use the and switches.
Detailed settings are made on MENU 7.
※
This function is disabled when an internal test
signal is displayed or in the PC input mode.
⑱
CHROMA
manual control
・
This control serves as a manual/preset switch for
chroma or a manual data variable control.
・
The control pops out when it is pressed and the
mode is changed to MANUAL.
⑲
BRIGHT
manual control
・
This control serves as a manual/preset switch for
brightness or a manual data variable control.
・
The control pops out when it is pressed and the
mode is changed to MANUAL.
CONT
manual control
・
This control serves as a manual/preset switch for
contrast or a manual data variable control.
・
The control pops out when it is pressed and the
mode is changed to MANUAL.
・
This control can be an allocation to BACKLIGHT
according to the NENU setting.
AUDIO
control
・
Use this control to adjust the sound volume of the
front speaker or the headphones.
※
An audio (analog/embedded audio) to be
outputted to the speaker must be set on MENU6.
SDI ERROR
indicator
・
This LED alarm indicator will light up in red in
SDI signal transmission error (CRC, TRS, check
sum, line number).
21
20
22