■
OSD
Main
▶
Setting
▶
OSD
English
used to change the transparency level of OSD [ 0 (opaque) ~ 10 (transparent) ]
OSD Position
used to change the position of OSD
■
Load System Default
Main
▶
Setting
▶
Load Sys Default
- Used to reset the monitor to factory default setting
[ No, Yes]
* except for changes in color temperature (refer to Color Temp in Video section)
■
Temperature Ctrl
Main
▶
Setting
▶
Temperature Ctrl
used to control both shutdown ref and auto fan ref together [ 2.0
℃
min ~ 6.0
℃
max ]
Shutdown Ref
panel shutdown temperature setting [ 70
℃
min ~ 90
℃
max ]
Auto Fan Ref
temperature setting to turn on/off fan [ 40
℃
min ~ 60
℃
max ]
Fan On/Off
used to turn on/off fan function [ Auto, Off, On ]
Fan Speed
used to set fan speed [auto, slow, normal, fast]
Temperature
to check internal temperature of the monitor
■
Bklight Dimming
Main
▶
Setting
▶
Bklight Dimming
■
Misc
Main
▶
Setting
▶
Misc
Background Gray
gray level in blank section of source [ 0min ~ 7max ]
Gamma Correction
used to activate gamma correction on the screen [ On, Off]
*It takes time to change the mode depending on source, screen size, etc.
Gamma Curve
when gamma correction is ON, users can change gamma level [ 1.0 ~ 3.0 ]
Key Brightness
used to control backlight of 14 white keys on the front
Front Dial Lock
used to lock bright, contrast, and chroma knob on the front
Power Saving
power saving mode among off, DPMS, and convertor
Language
OSD Blend
- Used to change options in on-screen display
[ Left/Top, Center/Top, Right/Top, Left/Middle, Center/Middle, Right/Middle, Left/Bottom,
Center/Bottom, Right/Bottom ]
- Used to control backlight brightness control [ 0min ~ 100max ]
- Used to apply changes to below
- Used to control temperature of the monitor
Hysteresis
Setting
15
