
20
Direct Wire Method
Power Supply Cord Method
7.
Reconnect power or plug in dishwasher.
Check Operation
1.
Read the Use and Care Guide that came with your
dishwasher.
2.
Check that all parts have been installed and no steps were
skipped.
3.
Check that you have all the tools you used.
4.
Start dishwasher and allow it to complete the shortest wash
cycle. After the first 2 minutes, unlatch door, wait 5 seconds,
then open door.
5.
Check that there is water in the bottom of the dishwasher tub.
Check that dishwasher is working properly.
6.
If not, disconnect power or unplug dishwasher and see “If
dishwasher does not operate” section.
If Dishwasher Does Not Operate
First try the solutions suggested here to possibly avoid the cost of
a service call.
■
Has the circuit breaker tripped or the house fuse blown?
■
Is the door closed tightly and latched?
■
Has the cycle been set correctly to start the dishwasher?
■
Is the water turned on?
If dishwasher still is not operating, call
1-866-664-2449.
WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Summary of Contents for UNDERCOUNTER DISHWASHER PLASTIC GIANT TUB MODELS
Page 43: ...43 Notes ...