3
1
2
To remove filters (
B
)
and (
C
), turn the
handle counter-
clockwise and re-
move. Pull apart fil-
ter (
B
) and (
C
).
Wash the filters with
water.
4
A
Remove filter (
A
).
Wash the filter with
water.
5
A
D
Put filter (
A
) to its
initial position.
Make sure that it
assembles correctly
under the two
guides (
D
).
6
2
1
Assemble filters (
B
)
and (
C
). Put them
into position in filter
(
A
). Turn the handle
clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and dam-
age to the appliance.
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
Troubleshooting
The appliance does not start or it stops dur-
ing operation.
Before you contact the Service, refer to the
information that follows for a solution to the
problem.
With some problems, the display shows
an alarm code:
•
- The appliance does not fill with wa-
ter.
•
- The appliance does not drain the
water.
•
- The anti-flood device is on.
Warning!
Deactivate the appliance
before you do the checks.
ENGLISH
14
Summary of Contents for SKINANDE
