IKEA KYLANDE, Manual, Page: 18 / 48

Problem Possible cause Solution
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the
compressor.
Attach the melting water outlet
to the evaporative tray.
Temperature cannot be set. The Shopping Function is
switched on.
Switch off Shopping Function
manually, or wait until the
function deactivates automati-
cally to set the temperature.
Refer to " Shopping Function".
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the Mode pressed for
approximately 10 seconds un-
til a long sound is heard and
display turns off for a short
time.
The temperature in the ap-
pliance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower tempera-
ture.
The temperature in the ap-
pliance is too low/too high.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The temperature in the ap-
pliance is too low/too high.
The food products temper-
ature is too high.
Let the food products temper-
ature decrease to room tem-
perature before storage.
The temperature in the ap-
pliance is too low/too high.
Many food products were
inserted at the same time.
Insert less food products at the
same time.
The temperature in the ap-
pliance is too low/too high.
The door has been
opened too often.
Open the door only if necessa-
ry.
The temperature in the ap-
pliance is too low/too high.
The Shopping Function is
switched on.
Refer to "Shopping Function".
The temperature in the ap-
pliance is too low/too high.
There is no cold air circula-
tion in the appliance.
Make sure that there is cold
air circulation in the appliance.
There is too much con-
densed water on the rear
wall of the refrigerator.
Door was opened too fre-
quently.
Open the door only when nec-
essary.
There is too much con-
densed water on the rear
wall of the refrigerator.
Door was not closed com-
pletely.
Make sure the door is closed
completely.
ENGLISH 18