background image

ENGLISH 

16

examine the product and decide, at its 

sole discretion, if it is covered under this 

guarantee. If considered covered, IKEA 

service provider or its authorized service 

partner through its own service operations, 

will then, at its sole discretion, either repair 

the defective product or replace it with the 

same or a comparable product.

What is not covered under this guarantee?

•  Normal wear and tear.

•  Deliberate or negligent damage, 

damage caused by failure to observe 

operating and maintenance instructions, 

incorrect installation or by connection 

to the wrong voltage, damage caused 

by chemical or electrochemical reaction, 

rust, abrasion or scratching, corrosion or 

water damage including but not limited 

to damage caused by excessive lime in 

the water supply, damage caused by 

abnormal environmental conditions. 

•  Damage caused from the use of the 

appliance in a manner other than 

the use for which it was specifically 

designed.

•  Damage caused by power outages, 

electrical power surge or improper 

supply voltage via connection to Supply 

Authority mains or alternative supply 

systems.

•  Consumable parts including batteries 

and lamps, removable wire, glass and 

plastic trays and other accessories. 

•  Internal or external damage as a result 

of excessive use of cleaning products or 

cleaning agents.

•  Non-functional and decorative parts 

which do not affect normal use of the 

appliance, including any scratches and 

possible color differences. 

•  Accidental damage or blockages caused 

by foreign objects, eg. coins, underwires, 

nails, buttons or jewellery, or substances 

and cleaning or unblocking of filters, 

drainage systems or soap drawers

•  Damage caused by vermin, insects or 

pets.

•  Note – internal or external cabinet 

transport damage must be reported 

within 7 days of purchase date.

•  Damage to the following parts: ceramic 

glass, accessories, crockery and cutlery 

baskets, feed and drainage pipes, seals, 

lamps and lamp covers, screens, knobs, 

casings and parts of casings. Unless such 

damages can be proved to have been 

caused by production faults.

•  Cases where no fault could be found 

during a technician’s visit. 

•  Any consequential loss due to appliance 

failure.

•  Repairs not carried out by our 

appointed service providers and/or an 

authorized service contractual partner 

or where non original parts have been 

used.

•  Repairs to parts or systems caused by 

unauthorized modifications made to 

appliance.

•  Repairs caused by installation which is 

faulty or not according to specification.

•  Problems caused by incorrect or 

inadequate venting of the appliance.

•  The use of the appliance in a non 

domestic environment i.e. professional 

use.

•  Transportation damages. If a customer 

transports the product to his home or 

another address, IKEA is not liable for 

any damage that may occur during 

transport.  

However, if IKEA delivers the product 

to the customer’s delivery address, then 

damage to the product that occurs 

during this delivery will be covered by 

IKEA.

•  Cost for carrying out the initial 

installation of the IKEA appliance. 

However, if an IKEA appointed 

Authorized Service Centre or its authorized 

service partner repairs or replaces 

the appliance under the terms of this 

guarantee, the Authorized Service Centre 

or its authorized service partner will 

reinstall the repaired appliance or install 

the replacement, if necessary.

•  The benefits conferred by this express 

warranty are in addition to all other 

Summary of Contents for FOLKLIG





















Reviews: