SETTING UP YOUR REMOTE CONTROL:
Before you can use your remote control you will
need to complete a one-time set-up process to pair
the remote with the lights.
1. The UTRUSTA worktop light and the ANSLUTA
transformer are equipped with a small sensor
button. Press the sensor once and it will light up.
2. Next press the remote control for a blinking
signal.
Repeat the same procedure for each UTRUSTA
worktop light unit and ANSLUTA transformer
installed.
3. The remote control is now set for dimming or
turning the lamps on and off.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
Technical Data ANSLUTA remote control:
Type:
ICTD-KL-1
Frequency band:
2436.13 -2436.2 MHz
Operating frequency:
2436.20 MHz
Number of channels:
1
Transmit power:
2 mW
Mode of operation:
Simplex
Complies with IDA Standards DA106634
The crossed-out wheeled bin symbol
indicates that the item should be disposed
of separately from household waste. The
item should be handed in for recycling in
accordance with local environmental regulations
for waste disposal. By separating a marked item
from household waste, you will help reduce the
volume of waste sent to incinerators or land-fill
and minimize any potential negative impact on
human health and the environment. For more
information, please contact your IKEA store.
ENGLISH
4
Summary of Contents for 603.618.19
Page 1: ......
