IKEA 30515291, Manual, Page: 18 / 72

OVEN CONTROLS
IMpORTANT
With the Duration and End functions, the
appliance will stop cooking automatically.
Timer Functions
This appliance is equipped with three timer options: minute countdown timer, cook time (dur), and end
time (END).
Function Application
Minute Timer ( )
Use to track your cooking times without interfering with the cooking process.
The timer may be set from a minimum time of 1 minute to a maximum of 23
hours and 59 minutes.
Cook Time Duration
(dur)
Use to set the cooking time of the oven, from 1 minute to 10 hours.
End Time (END) Use to program the oven when to stop cooking, from 1 minute to 10 hours.
Display Indicators
A B C D
Figure 10: Clock display functions
• A: Duration and End time indicator
• B: Time display
• C: Timer active indicator
• D: Minute timer indicator
To set a timer function:
1. For Duration (dur) and END (end), use the
oven temp and oven mode knobs to set an
oven function and cooking temperature. (This is
not necessary for .)
2. Press Timer until the desired function option
appears, indicated by the bell symbol, dur, or
END , and starts to flash.
3. Press or to set the desired timer
function. The timer function activates, and
the corresponding indicator will appear in the
display. For End and dur, A will also appear in
the display.
NOTE
Duration and End time may be used at the same
time if you want the appliance to activate and
deactivate automatically. First, set Duration. Then,
set End.
4. When the time ends, the function’s indicator on
the display will start flashing and an signal will
sound for two minutes. Press any button to stop
the signal.
To cancel the timer function:
1. Press Timer until the desired function option
appears.
2. Press and hold and at the same time. The
timer function will go out after several seconds.
To change the acoustic signal:
1. To hear the current signal, press and hold .
2. Repeatedly press to change the signal.
3. Release . The last tone you heard will be the
new signal.
4. Wait five seconds for the setting to be
confirmed.
NOTE
When the appliance is disconnected from the out-
let or after a power outage, the signal tone will be
set back to the default tone.
Table 2: Timer Functions
18
EN