ENGLISH 19
Door lock device
To open the door with the door lock device
see Fig 1.
Fig. 1
The door safety device can be removed
by following the sequence of images (see
Fig. 2).
Fig. 2
Installation
Technical data
The technical informations are situated in
the rating plate inside the appliance.
• Make sure the power voltage specified
on the appliance rating plate is the
same as the mains voltage. The rating
plate is on the front edge of the oven
(visible when the door is open).
• Connect the appliance to the electricity
supply by means of an all-pole
disconnect switch with minimum contact
gap of 3 mm.
• Power cable replacement (type H05
RR-F 3 x 1,5 mm
2
) must be carried out
by a qualified electrician. Contact IKEA
Authorized Service Centre.
Electrical connection