Chapter 3 System Programming
3
0
0 Remarks
3
0
0
1 All the function setting must be carried out on extension 801 and un-lock first;
3
0
0
2 All the extensions must be of double tone;
3
0
0
3 Press * to start setting and press # to end the setting. You don`t have to hang up if something wrong occurs
during the setting. You may restart the setting by simply pressing * again;
3
0
0
4 If extension 801 is in direct dialing out mode, you need to press * to enter the internal system, and press it
again to start programming;
3
0
0
5 When the setting is finished, a long beep indicates that the setting is done correctly and saved in the system.
If ins tead an array of short chirps is heard,that would indicate an error occurred in the setting. You need to
check it out and reset the system;
3
0
0
6 All the setting involved multiple users can be carried out in a batch process mode. It will surely increase the
speed and accuracy of the setting.
3
0
1
1 Un-locking Programming Password
Format: * 01 abcd #
Explanation: abcd is the password.
The default Password is 1234
3
0
1
2 Changing the Password
Format: * 02 abcd #
Explanation: abcd is the new password.
*
b
2
d
0
c
a
#
Pick up 801 Input * 02 abcd # You will hear du hang up
The system must be unlocked before programming.(see 3.0.1.1)
*
b
1
d
0
c
a
#
Pick up 801 Input * 01 abcd # You will hear du programming
Unlocking Programming Password
