Ikco RUNNA LX, Owner'S Manual

Page: 63 / 103

62
3
Speedometer
If you press button (1), the total distance
and distance traversed per day are
displayed. To set the kilometer counter
to zero, push the button no. (1) when
the kilometer counter is displayed until it
shows zero.
Adjusting the illumination intensity of
the instrument cluster
Push the button (when the lights are
on) to adjust illumination intensity of the
instrument cluster. Release the button as
soon as the minimum (or maximum) setting
is obtained and then push the button to
increase (or decrease) brightness. As soon
as the lighting is of the required brightness,
release the button.
Flasher or Blinker light
Press the flasher button. All the direction
indicators start blinking. Even, when the
engine is off, the flasher stays on.
Automatic starting of the flashers
At the time of a sudden braking, flashers
get on automatically; this will continue
for about 5 seconds. Upon releasing the
brake or deceleration, scintillator are off.
again, the lights will get off automatically.
By pressing on the button, the flashers
turn off.
CONTROLS
Warning
In case the vehicle speed is reduced
at once (hard brake), flasher comes
on automatically is activated for at
least 5 seconds. This is for warning
the severe reduction of the speed.