Norbert Grüntjens
Internet: www.ikarus-germany.com
Internet: www.ikarus-usa.com
Internet: www.ikarus-france.com
#160600
160600-0702
Building Instruction
Bleriot III - The Parkflyer
When it comes to flight characteristics and stability, Bleriot III is the improved successor to our successful
model, the Bleriot II. Experience a truly special kind of flying. This model can be flown with only 2-3 channels
and flies so slowly that even the absolute novice has at all time the feeling of complete control. Bleriot flies at a
comfortable walking pace. However, you can not only fly when it is calm, as it is usally the case with slowflyers,
but because of the greater stability, you can also fly in slightly windy conditions. With the following instructions
you can easily assemble your Bleriot very quickly. You only need a few tools, CA Cyano-acrylate glue,
Styrofoam glue and (solvent-free) epoxy glue.
Bleriot III
Package Contents (The tail units are delivered uncut)
Additional items needed (not included in the kit)
IK160611 HL/Ikarus Motor/Gear/Prop for Park
Flyer
NiCad 250mAh IK 160535
NiCad 600mAh IK 160601
Use a 2-3 channel radio with micro servos and receiver
Few tools
Motor controller Ik160533
