5 Maintenance and Inspection
42
5.6
Replacement of the fuse
Maintenance and inspection cycle: when the fuse has blown
WARNING
•
Turn OFF (
) the power switch and unplug the power
plug from the socket before replacing the fuse.
Replacement method
1
Open the control cover.
When you push the right edge of the cover until hearing a click and then release the cover,
the cover is opened by a spring action. If the cover is held by the magnet, further open the
cover toward the front.
2
Using a flathead screwdriver, rotate counterclockwise the fuse case cap to remove it.
3
Remove the old fuse from the fuse case, and then install the new fuse.
4
Insert the fuse and the fuse case cap into the fuse holder.
5
Using a flathead screwdriver, rotate clockwise the fuse case cap to tighten it.
6
Close the control cover.
To close the cover, push the right edge of the cover until you hear a click.
This completes the replacement of the fuse.
Fuse (250 V, 4 A)
Fuse case
Fuse case cap