volume increase
Call Pick-up:
After connected with the cellphone successfully, the speaker beeps when a call comes in. Press
to
pick it up and to terminate conversation, press
one more time.
AUX Playback:
Use the supplied audio cable to connect the speaker to another music player such as computer by
plugging one end to the speaker's AUX port and the other end to the music player's audio port. When the
music player starts playing music, the speaker sounds right away. Tracks can be selected and volume
adjusted only by the music player.
Hints: 3 buttons of,
,
and
are functionless in the AUX mode and the volume is controlled
by the music player.
Intelligent Quick Recharge:
Recharge can be performed in the standby mode or power-off situation. Before recharging,
plug the mini-USB end of the supplied USB cable to the speaker's USB port and the other
end to the USB port of the computer or the USB recharger. When fully recharged, the red
indicator goes off.
VII.
Compatibility
Wireless
:
Devices configured with Bluetooth 3.0 or higher version such as IPAD, IPHONE (at least the second
generation IPHONE installed the IPHONE software 3.1), IPOD TOCH and MAC as well as a majority of
intelligent phones or computers that support Bluetooth.
Bluetooth V3.0 consists of protocols like A2DP, AVRCP and HFP and so on.
VIII.
Toubleshooting
Faults Phenomena
Solutions
Unable to pair up with other
devices
1.
Check whether the speaker is still in the process of search or switch it off and then
on.
2.
There are too many Bluetooth devices in the proximity that cause difficulty in
connection. Please turn them off.
The sound is rather low or distorted
1.
Check the Bluetooth device’s volume and then adjust it to a proper level.
2.
Recharge the battery
The music stops from time to time
1.
Check whether the speaker’s effective transmission range is exceeded or there is
an obstacle standing between the speaker and other Bluetooth devices.
The Bluetooth indicator remains off
1.
It suggests the battery power drops quite low and retry once being recharged.
2.
Turn it on again.
Hints:
Another trouble, please consult the dealer or an experienced radio/TV technician for help
.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.