TouchKit Touch Panel v3.1.4
6
Chapter 3. Configuration Utility and Right Button Emulator
After installation
TouchKit
and rebooting system, the driver will probe all
communication devices by default. Execute
TPANEL -?
for more options.
Note:
If user attaches
TouchKit
controller to another communication port, please
reboot computer.
To avoid confusing the end-user,
TouchKit
driver use
the virtual TKT
port name
instead of
the com
port name. In order version driver,
TouchKit
driver parsers the
com1 and com2 from the system environment.
If the user needs another com port,
for example com5
, all the end-user to do is
set the environment variables as set
COM1 = IOADDR, IRQ
. However, this new driver package
use TKT instead of com
.
This suit supports at most two serial ports; which are
TKT1 (IO:0x3F8 IRQ:4)
and
TKT2 (IO:0x2F8 IRQ:3)
by default.
If BIOS settings differ (ex. COM1 is of IO addr
3E8 and IRQ 4), add one more line (before TPANEL.EXE) in AUTOEXEC.BAT to
redirect:
SET TKT1 = 3E8 4
Also, If the user needs the controller at another serial port ( for example, com5 where
IO address is 4F8, IRQ is 4 ), it need to redirect the system environment variable by
SET TKT1 = 4F8 4
before launch TPANEL.EXE in the AUTOEXEC.BAT
TouchKit for DOS Version 1.00.02.0904
Test TKT1...no panel found
Test TKT2...no panel found
Test PS2...Loopback OK
Read settings from PS2...OK
Driver installed
