www.ikancorp.com | 1.713.272.8822 | [email protected]
because we’re
filmmakers
too
Internal Care Instructions
Please clean the reflector and lens regularly with a customary glass cleaning agent. Please check that the reflector shows no kind of corrosion or damage.
Keep the contact surfaces of the electrical connections and lamp holder clean.
Lightstar Disclaimer
The manufacturer disclaims liability for any damage to persons or property caused by inappropriate or misuse of the fixture. Damage of this kind is
responsibility of the operator.
Inserting Accessories
Inserting and exchanging accessories must be carried out from a stable position. Make sure all accessories being used with the LHS-001 are securely
locked.
WARNING! Do NOT operate the fixture with closed barn doors! The risk of overheating can occur.
Periodic Fixture Inspection
1. The condition of the internal wiring and ceramic base will need to be inspected and tested every 4000 working hours
or at least once a year. This frequency may need to be increased if the fixture has endured rough treatment. All internal
components should only be replaced with Lightstar spare parts.
2. The lamp should be checked every 100 working hours. The lamp should be changed if the lamp becomes deformed or
damaged otherwise explosion might occur. Defer to instruction provided by the lamp manufacture.
3. Always check the safety shield before every use.
4. All high-voltage components (ex: voltage wires, lamp ceramic, external shield, igniter must be inspected every 100 working
hours or at least once a year).
5. Outer door hinges and latching system must be checked every 250 working hours to insure proper seating of the safety
shield. This will allow inspections of accessories and the holding clamps.
6. The condition of the internal mirror must be maintained every 250 working hours. It must be replaced whenever it becomes
either cracked or broken. It is essential for the performance of the fixture.
