False Color
This feature utilizes a full spectrum of assigned color indicators to show overall brightness of the image. This
helps achieve perfect exposure.
Submenu Options:
Under Warn. - Allows the user to set the desired IRE level in which the image will show purple
for the under-exposed areas of the image.
Over Warn. - Allows the user to set the desired IRE level in which the image will show red for
the over-exposed areas of the image.
Tooltip - Enables or disables the color code key on the screen.
Zebra
(Not Available HDMI 1 Input)
The monitor will display slanted lines where the image is over-exposed or
under-exposed.
Submenu Options:
High Area - ON / OFF
Factor - Adjust sensitivity of over-exposure lines
Color - White, Red, Green, Blue, Black
Low
Area
-
ON/OFF
Factor - Adjust sensitivity of under-exposure lines
Color - White, Red, Green, Blue, Black
Audio Meters
(Not Available HDMI 1 Input)
Allows the operator to monitor up to 8 channels of audio
Submenu Options:
Audio Meters - ON / OFF
Audio Channel - 2 Channel, 8 Channel
Position - Top, Bottom, Division (2 Channels on top, 2 Channels on bottom)
Waveform
(Not Available HDMI 1 Input)
Toggles between the different scopes available: Waveform, Vectorscope, RGB
Parade,
Histogram,
Audio
Meters
Submenu Options:
Waveform - Full screen, Four screen, All types (all scopes on screen at once), User mode,
(custom position and scopes on screen at the same time).
Options - Allows the operator to enable individual scopes and choose options
Blending - 0-100 (Choose opacity of the scopes)
SDI WF Mode - On Screen, Output (choose to display the scopes on the monitor screen or
output them via SDI to a secondary monitor).
Dual Link SDI
Enable or disable Dual Link SDI
Pixel Measure
(Not Available HDMI 1 Input)
Enables the pixel measure feature. This allows the user to get precise pixel color information
in various output formats.
Submenu Options:
RGB / YCbCr
8-Bit
/
10-Bit
Hexadecimal
/
decimal
X:
Position
Y:
Position
HDR Preview
(Not Available HDMI 1 Input)
Enable HDR Viewer
Submenu Options:
HDR Preview - ON/OFF
HDR
Range
-
0-10
Log Formats - Allows adjustment of camera log format
Gamuts
-
Allows
adjustment
of
gamut
Time Code
(Not Available HDMI 1 Input)
Enable time code display
Submenu Options:
Time Code - ON/OFF
Mode
-
VITC,
LTC
Position - Choose the position of the time code on screen