www.ikancorp.com | 1.713.272.8822 | [email protected]
because we’re filmmakers too
Configuration of Setting Menus
Functions
Center Mark – On, Off
Safe Area – Off, 95, 93, 90, 88, 85, 80 (Percent)
Display Ratio – Full, 16:9, 4:3, 5:4, 1:1, 1.85:1
Peaking Color – On, Off
Underscan – On, Off
Check Field – Off, Red, Green, Blue
Battery Information – On, Off
Display Mode
1P – Display single signal output
2P LR – Display two signal left and right
2P TB – Display two signal top and bottom
2P PIP – Display two signal picture in picture
Display Functions
Display Rotate – 0, 90, 180, 270 (Degrees)
Freeze – On, Off
L/R Ratio – Adjust L/R display ratio
Swap – switch the two signals
Flip-H – Flips the image horizontally
Signal Source
SDI 1
SDI 2
SDI 3
SDI 4
HDMI 1
HDMI 2
Audio
Volume – 0-100
Audio Source – Analog, Digital
Mute – On, Off
System
Reset – reset to factory settings
OSD HPOS – Adjust horizontal location of menu
OSD VPOS – Adjust vertical location of menu
Language – English, Chinese
Rotate – 0, 90, 270 (Degree)
Border Width – 0-100
Border Color – Red, Green, Blue
Display Settings
Brightness – 0-100
Contrast – 0-100
Saturation – 0-100
Hue – 0-100
Sharpness – 0 ; 2 ; 4
Backlight – 0-100
Color Temp – 9300K, 7500K, 6500K, 58000K, sRGB, User (Custom)
Gamma – Off, 1.8, 2.0, 2.2, 2.4
Freeze – On, Off
4P – Display four signals