IKA ULTRA-TURRAX T 65 basic, Operating Instructions Manual

Page: 19 / 124

19
Switching the T 65 digital ULTRA-TURRAX
®
unit on and off:
- EMERGENCY STOP switch / power switch (A)
Operation: The main switch is marked yellow/red and functions
also as an EMERGENCY STOP switch. If the main switch is actu-
ated the unit is deenergised.
- Turn the "EMERGENCY STOP switch" rotary knob (A) clockwise,
the unit is supplied with power. "rdy" (ready) appears on the
display
(F) .
- Set the "Speed setting" rotary knob (E) to the lowest value
(10%).
- Press the "Start" button (D) on the front membrane. The unit
starts up at 1000 rpm with smooth start.
CAUTION! Membrane buttons must be kept pressed for at
least a second for a command to be acknowledged.
- Slowly turn the "Speed setting" rotary knob (E) to the desired
setting. The actual speed appears on the display (F) .
- Keep the "Stop" button (B) pressed for at least a second to stop
the unit. The unit starts up slowly. "rdy" (ready) appears again
on the display
(F) .
When slowing down, "dEC" (decrease) is displayed; after com-
ing to a stop "rdy" (ready) is displayed.
- In emergency actuate the "EMERGENCY STOP switch" by turn-
ing the "EMERGENCY STOP switch" rotary knob (A) anticlock-
wise. The unit is deenergised, and the display (F) goes out.
D
B
A
F
E
C
Fig. 5
The device operates maintenance-free.
As necessary, but in any case not less than every six months, the
following points must be checked:
- EMERGENCY STOP switch operation
- Safety limit switch operation (with the stand in the lower position)
- Electrical consumers, connections and cables for damage.
Cleaning:
For cleaning disconnect the main plug!
Use only cleaning agents which have been approved by IKA to
clean the devices:
These are: water (containing surfactant) and isopropyl alcohol.
- Wear protective gloves during cleaning the devices.
- Electrical devices may not be placed in the cleansing agent for
the purpose of cleaning.
- Do not allow moisture to get into the device when cleaning.
- Before using another than the recommended method for
cleaning or decontamination, the user must ascertain with IKA
that this method does not destroy the device.
Maintenance and cleaning
T 653 Telescopic stand
SI 400 Safety limit switch
SI 474 Support holder
Accessories
S 65 KG-HH-G 65 G Dispersion tool coarse
S 65 KG-HH-G 65 M Dispersion tool medium
S 65 KG-HH-G 65 F Dispersion tool fine
Spare parts order:
When ordering spare parts, please give:
- Machine type
- Manufacturing number, see type plate
- Item and designation of the spare part,
see
www.ika.com , spare parts diagram and spare parts list
Repair:
Please send instrument in for repair only after it has been
cleaned and is free from any materials which may consti-
tute a health hazard.
For this you should request the “ Decontamination Clearance
Certificate ” from IKA , or use the download printout of it from
the IKA website www.ika.com .
Return the instrument in its original packaging. Storage packag-
ing is not sufficient. Also, please use suitable shipping package
materials.
See more accessories on www.ika.com .