31
Press K2 twice or three times to get into the auto-programming time setting,
“Auto-programming Icon” flashes. Press K1 and K3 to adjust continuous time and end
time.
5s after setting, it will work automatically work, “ Auto-programming Icon” keeps
lighting up. If continuous time is 0, turn off the relay contact, and “ Relay Operation
Icon” is dark, “ Auto-programming Icon” flashes, the buzzer is buzzing.
This mode’s range of continuous time and end time:
Adjustment range for continuous time:
＞
0 but
≤
10 hours
Adjustment range for end time: present time
＜
end time<
＝
present time + 10 hours
If meet this standard: end time = present time + continuous time
For example: the present time is 2
：
00, then the max. end time is adjusted to 12
：
00
（
2
：
00
＋
10
：
00
＝
12
：
00. When the end time is adjusted to 12
：
00, then the continuous time
is 10
：
00.
5s after adjusted, automatic program is working. After 10 hours, if continuous time is
counting down to 0, turn off the relay contact, and “Relay Operation Icon” is dark,
“Auto-programming Icon” flashes, the buzzer is buzzing.
Note:
1.
only use this setting for either continuous time or end time.
For example: the present time is 2
：
00, and if let the oven work for 3 hours, set the
continuous time to 3
：
00, and the end time will automatically change to 5
：
00 and
vice versa.
2.
If the continuous time is equal to 0 or the end time is equal to the present time, it
means that the automatic program is over.
3.
When the automatic program is over, the continuous time is 0 and the end time is
equal to the present time.
②
Automatic Mode
Use this mode for setting oven’s starting time and end time, which means make an
appointment to boot. When the time is over, it will automatically turn off the heating
and the buzzer is buzzing to inform the user.
Press twice to get into the continuous time setting mode under the common mode, press
three times to get into the end time setting mode.
When the continuous time setting is ok or the end time setting is ok, then press K2 to get
into the other kind of automatic program time setting, “ Auto-programming Icon”
flashes, press K1 and K3 to adjust continuous time and end time.
