English
23
Connecting line level signal to the RCA inputs
It is possible to connect any line level source to the RCA inputs. This signal can come from an mp3 player,
a computer or an audio mixer. The main Level knob adjusts the overall volume that is recorded. To adjust
the volume of the device connected to the RCA inputs, use both the volume controls of the device and the
numbered thumbwheel “RCA” on the side of iRig Stream Pro.
IMPORTANT: please note that these are line level inputs and not PHONO inputs so, PHONO signal, needs to be
converted to a LINE LEVEL signal before to be connected.
Connecting microphone
Always connect the microphone to iRig Stream Pro with XLR-to-XLR balanced cable. This will ensure a pristine
and clean performance from your microphone with iRig Stream Pro. Before connecting dynamic microphones
make sure phantom power is turned OFF. Check that the Phantom Power switch is in the OFF position.
