English
11
Reset iRig KEYS 37
iRig KEYS 37 can be reset to its original factory state. This can be done independently for each one of the SETs
or for the normal no-SET mode.
To reset iRig KEYS 37 or a SET:
• Load the SET you would like to reset, or to not load any SET, you can reset the normal no-SET mode.
• Enter EDIT mode (see beginning of Chapter 3).
• Press the A#4 key (RESET).
Both PROG buttons will flash to show the SET has been reset, and iRig KEYS 37 will automatically exit EDIT
mode.
SETs
iRig KEYS 37 offers many options to satisfy the most demanding user. However, when the keyboard is used
live or to control many different instruments, it could be time consuming and tricky to manually set all the
parameters you need each time.
For this reason, iRig KEYS 37 has 4 user configurable presets that can be recalled on the fly by pressing just
one button, these are called SETs.
How to load a SET
To load any of the four SETs just press the SET
5
button. Each time the SET button is pressed, iRig KEYS 37
loads the NEXT SET, cycling this way:
-> NO SET -> SET 1 -> SET 2 -> SET 3 -> SET 4 -> NO SET …
How to program a SET
To program a specific SET, always select it before, then set up iRig KEYS 37 as you prefer (see the Chapters
“Playing with iRig KEYS 37” and “Edit mode”).
How to save a SET
To store a SET so that it will permanently save all settings that you have made, HOLD the SET button for two
