Iiyama ProLite X2788QS User Manual Download Page 6

ENGLISH

2   FOR YOUR SAFETY 

CAUTION

INSTALLATION LOCATION

Do  not  install  the  monitor  where  sudden  temperature  changes  may  occur,  or  in  humid,  dusty  or 
smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the 
sun shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

The monitor may topple and cause injury if not suitably located. Please also ensure that you do not 
place any heavy objects on the monitor, and that all cables are routed such that children may not 
pull the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause 
fi re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do  not  remove  the  tilt  stand  when  operating  the  monitor.  Ventilation  slots  on  the  back  of  the 
cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fi re 
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft 
material may also cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

When you move the monitor, turn off  the power switch, unplug the monitor and be sure the signal 
cable is disconnected. If you do not disconnect them, it may cause fi re or electric shock.

UNPLUG THE MONITOR

If the monitor is not in use for a long period of time it is recommended that it is left unplugged to 
avoid accidents. 

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable 
itself as this may cause fi re or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

Be  sure  the  computer  is  strong  enough  to  hold  the  weight  of  the  monitor,  otherwise,  you  may 
damage your computer.

CAREFUL! PROTECT YOUR HANDS AND FINGERS

 Be careful not to hurt your fi ngers or hands when you change the height or the angle.

 Injury can occur if care is not taken to avoid fi nger contact with the displays base when adjusting 

the height. (Just for height adjustable model.)

REMARK FOR 24/7 USAGE

This product is not specifi cally designed for 24/7 usage in all environments.

OTHERS

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. 
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) 
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour 
is recommended as looking at the screen continuously can cause eye strain.

Summary of Contents for ProLite X2788QS

































Reviews: