ENGLISH
OPERATING THE MONITOR 19
LOCK MODE:
<Monitor OSD key>
Pressing and holding the MENU button and the UP button for about 3 seconds when the Menu is
not displayed.
<Remote Control>
1.Press the SELECT button when the menu is not displayed.
2.Press the button, button, button, button.
* To release the Remocon Lock, display the LOCK MODE menu with the OSD key and release it.
The following OSD menu is displayed.
Adjustment Item
Problem / Option
OSD Lock
Power Key Lock
Off
On
The POWER SWITCH is Locked.
The POWER SWITCH is Unlocked.
Off
On
The OSD menu is Locked.
The OSD menu is Unlocked.
Remocon Lock
The Remote Control is Locked.
The Remote Control is Unlocked.
Off
On
NOTE
PALM REJECTION FUNCTION:
Palm rejection is a way to disregard touch made with “a large contact area” while using pen or
finger modes.
A large contact area : palm, clenched fist, elbow, arm, etc.
When you touch the screen with a pen or a finger, palm rejection is activated and the screen does
not recognize touch made with the large contact area.
The screen works only with conductive pens with Φ5-6mm diameter.
The touch panel does not recognize pens with smaller or large diameter.
Touch made by a pen is not recognized within 15mm distance from edge of the active display
area.
The OSD menu is not displayed when the OSD is locked.
To unlock monitor OSD key, Pressing and holding the MENU button and the UP button for about
3 seconds when the Menu is not displayed.
To unlock the Remote Control, Press the SELECT button when the menu is not displayed. Then,
press the button, button, button, button.
