ENGLISH
20 BEFORE YOU OPERATE THE MONITOR
[ Network Connection ]
Connecting to a LAN
To set the monitor to connect to a local area network.
1. Connect a RJ45 cable to the corresponding ports on the monitor and your LAN switch or router.
2. Select the LAN in the Control Setting of the OSD menu.
3. Set the Network Settings of the OSD menu. (IP Address Setup / DNS Setup)
4. Save the settings and return to the previous menu.
Controlling the Monitor
Once you have the correct IP Address for your monitor and the monitor is on or in standby mode,
you can use any computer that is on the same local area network to control the monitor.
• You can not control the monitor via the RS-232C connector when LAN control is in use.
• It is recommended that you use a recent Internet Explorer browser version.
1. Enter the IP Address of the monitor in the address bar of your browser and press ENTER
button.
2. Input ID and Password.
ID: admin
Password: system
3. The setting page appears.
INFORMATION / PICTURE&SOUND / SCREEN / SETTING / SCHEDULE / MAIL REPORT /
NETWORK
If you would like to turn on the monitor from a web page.
Make sure the setting > Control setting menu is set to LAN, and the setting > Power
Save menu is set to Off .
NOTE
NOTE
IP
address
Main
menus
