ENGLISH
16 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 31. You are also able to adjust the picture by following the button
operation shown below. For more detailed adjustments, see page 25 for SCREEN ADJUSTMENTS.
Press the MENU Button to start the On Screen Display (OSD) feature. There are
additional Menu items which can be switched by using the
/
Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the ENTER Button. Then, use the
/
Buttons to
highlight the desired adjustment icon.
Press the ENTER Button again. Use the
/
Buttons to make the appropriate
adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would be
automatically
saved.
When button operations are aborted during adjustment, On-Screen Display disappears
when the time set for the OSD Time Out has passed. Also, the EXIT button can be used
to return previous menu and turn off the On-Screen Display.
Any changes are automatically saved in the memory when the On Screen Display
disappears. Turning off the power should be avoided while using the Menu.
Adjustments for Image H./V.Position, Clock and Phase are saved for each signal timing.
Except for these adjustments, all other adjustments have only one setting which applies
to all signal timings.
For example, to correct for vertical position, select Menu item of (Setup) and then press the
ENTER Button. Then , select V. Position by using the / Buttons.
An adjustment page appears after you press the ENTER Button. Then, use the / Buttons
to change the vertical position settings. The vertical position should be changing accordingly
while you are doing this.
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
NOTE
HDMI2
DVI
HDMI1
DisplayPort
EXIT : E x i t
S e l e c t : ENTER
Audio
Picture
PiP/PbP
Color
Language
OSD Settings
Input Select
VGA
Setup Menu
Phase
H. Position
V. Position
Clock
DisplayPort
EXIT : E x i t
S e l e c t : ENTER
Audio
Picture
PiP/PbP
Color
Language
OSD Settings
Input Select
Auto Image Adjust
Setup Menu
Blue Light Reducer
Memory Recall
Information
50
50
39
48
1.1
Off
Phase
H. Position
Clock
DisplayPort
EXIT : E x i t
Audio
Picture
PiP/PbP
Color
Language
OSD Settings
Input Select
Auto Image Adjust
Setup Menu
Blue Light Reducer
Memory Recall
Information
50
50
39
48
1.1
Off
V. Position
Schduling
Schduling
S e l e c t : ENTER
V. Position
50
