Iiyama PROLITE LE3240S, User Manual

Page: 20 / 46

ENGLISH
16 BEFORE YOU OPERATE THE DISPLAY
CONNECTING YOUR THE DISPLAY
Ensure that both the computer and the display are switched off.
Connect the computer to the display with the signal cable.
Connect the computer to the display with the RS-232C Cable.
Connect the Power Cable to the display first and then to the power supply.
Turn on your display (Main Power Switch and Power Switch) and computer.

The signal cables used for connecting the computer and display may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the display and the computer. The cable supplied with the display is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama office.

For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama office for a suitable adaptor.

Make sure you tighten the finger screws at each end of the Signal Cable.

Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
<Back>
NOTE
Computer
AV Equipment etc.
VGA Cable (Accessory)
DVI-D Cable (Accessory)
HDMI Cable (Not Included)
Power Cable (Accessory)
RS-232C Cable
(Accessory)
Audio Cable
(Not Included)