ENGLISH
ENGLISH
APPENDIX B
Optional Video Input
This OSD Menu is available only when the optional video adapter is installed in the monitor.
Video input is not selected automatically from Analog or Digital input. Switch to video input by “Signal
Select” on OSD Menu or the Input Button. Under the power management mode, “Signal Select” page
is displayed directly by pressing the Menu Button when the Menu is not displayed.
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations.
l
Brightness:
Press the Brightness Button when the Menu is not displayed.
l
Contrast:
Press the Contrast Button when the Menu is not displayed.
l
Signal Select: Press the Input Button.
Direct
SWITCHING BRIGHTNESS / CONTRAST ADJUSTMENT
To switch between Brightness and Contrast adjustments, press the Menu Button within 10
seconds after pressing the Brightness Button or the Contrast Button during the direct
adjustments above.
SIGNAL SELECT (D-SUB / DVI / CV / SV)
D-SUB / DVI / CV / SV signal is switched as follows by pressing the input Button successively
when all of the signal inputs are connected to a signal source.
NOTE
D-SUB DVI CV SV
25 APPENDIX B
