manualshive.com logo in svg

Iiyama PLT4938, User Manual

Share
Download
Iiyama PLT4938 User Manual Download Page 16

ENGLISH

  BEFORE YOU OPERATE THE MONITOR  13  

CONTROLS : REMOTE CONTROL

ON/OFF

Turn the monitor ON and OFF. 

INPUT

Select the source. 

Number (1-9) / 

Input source

Serve as input source buttons when 

the Menu is not displayed. 

(VGA/DVI/HDMI-1/HDMI-2/DP)

     

Number (7) / 

MODE

Select the Picture mode. 

EXIT

Return to a previous menu or closes 

the OSD Menu. 

     

Navigate through submenus and 

settings. 

: Up Button

: Down Button

: Left Button

: Right Button 

 (VOLUME-): 

Decrease the sound 

volume.

 ()

: Increase the sound 

volume.

OK

Confirm your selection or save 

changes.

INFO

• Provide source and resolution 

information.

• Press and hold this button for 3 

seconds to minimize the brightness. 

The brightness returns to its previous 

level by repeating the above button 

operation again. 

MENU

Open the monitor's on-screen menu 

systems. When the menu system is 

already open, pressing this button 

will select the previous submenu.

Number (0) / 

MUTE

Turn on or off the mute function 

when the Menu is not displayed.

Summary of Contents for PLT4938












































Reviews:

No comments

Brands by name

Popular brands

Load more brands